High-power load test machines are intended for investigation of various materials, components and structures for assessing their strength and operational robustness.
The test complex facilities are able to accommodate large structures and generate high loads as great as 30000 kN both in static and cyclic modes.
MUG-3000 Multipurpose Load Test Machine
Maximum load 3×107 N
Maximum travel 0.5 m
Maximum size of test structure:
tension tests:
- width 5,5 m
- thickness 0.05 m
- length 15 m
compression tests:
- cross section 3×5.5 m
- length 1.6 m
bending tests:
- width 3.5 m
- thickness (height) 2 m
- span between supports 4.5 m
MPI-600 Bending Test Machine
Maximum load 6×106 N
Maximum travel 0.15 m
Maximum size of test structure:
- width 1.5 m
- thickness 2.5 m
- span between supports 8 m
MP-800 Multipurpose Load Test Machine
Maximum load 8×106 N
Maximum travel 0.3 m
Maximum size of test structure:
tension tests:
- width 1.5 m
- thickness 0.05 m
- length 3 m
compression tests:
- cross section 0.8×1.5 m
- length 3 m
bending tests:
- width 0.8 m
- thickness (height) 0.5 m
- span between supports 1.5 m
All test machines are provided with electronic load control systems enabling simulation of various cyclic loading patterns (sine, saw-tooth, etc.) and measurement of strains, displacements and forces on test structures. Test specimens and structures can be made of metals, plastics, concrete, wood or any other required materials or combinations thereof.
